SPECIFICATION OF VIRGIN FUEL OIL D6
|
METHOD |
TEST |
RESULT |
UNIT |
|
ASTM D5002 |
Density and Relative Density of Crude Oils Average API Gravity |
29.7 (29.7) (Min) |
API |
|
ASTM D1298-99 |
Density @15 Deg C |
0.87 (0.8775) (Max) |
Kg/t |
|
ASTM D97 |
Pour Point of Petroleum Products Pour Point Pour Point |
< -33 (-36) (Below Zero) < -27.4 (-32.8) (Below Zero) |
°C °F |
|
ASTM D93-IP34 |
Pensky-Martens Closed Cup Flash Point Corrected Flash Point |
117 (137) (MIN) |
°F |
|
ASTM D4294 |
Sulfur Content in Petroleum Products by EDXRF Sulfur Content |
0.38 (0.358) (MAX) |
Wt% |
|
ASTM D445 |
Kinematic/Dynamic Viscosity Kinematic Viscosity @ 122°F / 50°C |
17.83 (18.12) (MAX) |
Mm2/s |
|
ASTM D6304 |
Water Content by Coulometric Karl Fisher Titration Water Content |
0.20 (0.7) (MAX) |
Wt% |
|
ASTM D482 |
Ash from Petroleum Products Average Ash |
0.279 (1.007) (MAX) |
Wt% |
|
ASTM D2161 |
Conversion of Kinematic Viscosity To SUS/SFS 1 Saybolt furoi viscosity 122°F |
10.9SFS (MAX) |
|
|
ASTM D5184 |
Aluminum and Silicon in Fuel Oils by ICP-AES or AAS Aluminum Content Silicon Content |
102 (MAX) 93 (MAX) |
Mg/kg Mg/kg |
|
ASTM D95 |
Water by Distillation, Vol% |
0.70 (MAX) |
Vol% |
|
ASTM D4530.06 |
Carbon Residue |
1.11 (MAX) |
Wt% |
|
|
|||
|
METHOD TEST RESULT UNITS |
|
|
|
|
IP 143 |
Asphalt Heptane insoluble Asphalt Content |
0.08 |
Wt% |
|
IP 501 |
Determination of AL, Si, V, Ni, Fe, Na, Ca, Zn, P in Fuel Oil-ICPES Aluminium Silicon Sodium Vanadium Calcium Zinc Phosphorus Iron |
372 187 117 1 779 298 4176 545 |
mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg mg/kg |
